Ground Zero GZIA 1.700 – Mono Class A/B Amplifier
universal-fit

Ground Zero GZIA 1.700 – Mono Class A/B Amplifier

R3,335.00

Single-channel Class A/B amplifier delivering 230 W RMS at 4 Ω and 630 W RMS at 1 Ω, with a variable active crossover, bass boost and a wired bass remote.

Installation is excluded from the advertised product price unless specifically stated otherwise. Should you require professional installation, please contact the Rivonia Car Sound team for advice and a separate quotation. Additional installation accessories may be required, depending on the vehicle and product.

SKU GZIA 1.700 Category Brand:

Suitable for:

Vehicle logos indicate compatibility only. This product is not manufactured or endorsed by the vehicle brand.

1-channel Class A/B mono amplifier

This 1-channel full-range amplifier uses a Class A/B circuit and is stable down to 1 Ω. It produces 230 W RMS at 4 Ω, 400 W RMS at 2 Ω and 630 W RMS at 1 Ω, and its integrated active crossover offers low-pass, high-pass and band-pass modes for subwoofer or full-range use.

It accepts RCA or high-level speaker inputs, and switches on automatically when the high-level input is used. Bass boost of up to +12 dB at 45 Hz and the included wired bass remote help tune low-frequency output, and the circuit is cooled by a black anodised heatsink.

230 WRMS power at 4 Ω
630 WRMS power at 1 Ω
1 ΩMinimum load
2 × 30 AFuses

Technical specifications

Product codeGZIA 1.700
TypeMono Class A/B amplifier
Channels1
RMS power at 4 Ω230 W (1% THD+N)
RMS power at 2 Ω400 W (1% THD+N)
RMS power at 1 Ω630 W (1% THD+N)
Maximum power700 W at 1 Ω (10% THD+N)
Frequency response10 Hz – 30 kHz (±3 dB)
Low-pass filter40 – 4000 Hz, 12 dB/oct
High-pass filter5 – 500 Hz, 12 dB/oct
Bass boost0 to +12 dB at 45 Hz
Input sensitivity200 mV – 6 V
Signal-to-noise ratioGreater than 87 dB
THD+NLess than 0.02%
Damping factorGreater than 150
InputsRCA and high-level
Fuses2 × 30 A
Power cableAt least 20 mm² (4 AWG)
Dimensions (W × L × H)192 × 332 × 49 mm

Class A/B circuit that is stable down to a 1 Ω load.

Variable active crossover with low-pass, high-pass and band-pass modes.

Bass boost adjustable from 0 to +12 dB at 45 Hz.

Wired bass remote control included for adjusting bass level.

High-level speaker input with automatic turn-on function.

Black anodised heatsink with large power and speaker terminals.

Connectivity & integration

The amplifier accepts RCA line inputs or high-level speaker inputs from the head unit. With the high-level input, the amplifier switches on automatically when a signal is present, and the REM terminal is needed only for RCA operation.

The wired bass remote works when the mode switch is set to the LPF (band-pass) position. The manufacturer recommends a power cable of at least 20 mm² (4 AWG) and speaker cable of at least 2.5 mm² (14 AWG).

Professional installation recommended.
Disconnect the vehicle battery before installation; newer vehicles may then show fault codes.
Fuse the +12 V power cable within 20 cm of the battery.
Never use the RCA and high-level inputs at the same time.
Do not mount the amplifier on vibrating surfaces such as subwoofer enclosures.
Allow airflow around the amplifier and do not cover the heatsink completely.
Replace fuses only with fuses of the same value and type.

Vehicle compatibility

Vehicle-specific fitment is not published by the manufacturer. Confirm dimensions, connection requirements, and application before purchase.

What’s in the box

  • 1 × GZIA 1.700 mono amplifier
  • 1 × Wired bass remote control

you may like

Related Products

RCS Logo