MATCH UP 8DSP 8-Channel OEM DSP Amplifier with TuneEQ

MATCH UP 8DSP 8-Channel OEM DSP Amplifier with TuneEQ

R20,499.00

The MATCH UP 8DSP is an 8-channel compact DSP amplifier for OEM multi-channel systems, featuring 9-channel DSP processing, TuneEQ automated EQ and six high-level inputs for easy integration.

Installation is excluded from the advertised product price unless specifically stated otherwise. Should you require professional installation, please contact the Rivonia Car Sound team for advice and a separate quotation. Additional installation accessories may be required, depending on the vehicle and product.

SKU M118004 Category Tag Brand:

Vehicle logos indicate compatibility only. This product is not manufactured or endorsed by the vehicle brand.

Frequently Purchased Together

No results found.

The MATCH UP 8DSP is a compact 8-channel amplifier with an integrated 9-channel DSP and ACO 32 Bit coprocessor. It uses Class GD technology for high efficiency and delivers 6 x 65 Watts RMS into 4 Ohms on channels A-F plus 2 x 90 Watts RMS into 4 Ohms or 2 x 160 Watts RMS into 2 Ohms on subwoofer channels G-H. The unit includes BurrBrown A/D and D/A converters and supports DSP features such as TuneEQ, RealCenter and Augmented Bass Processing.

Engineered for OEM integration, the UP 8DSP provides six high-level inputs, an optical SPDIF input (12-96 kHz), a MATCH Extension Card slot, a mono line output and a Smart Control Port. Smart high-level inputs use the ADEP.3 diagnostics protection. Configuration and tuning are handled via DSP PC-Tool 5 with Virtual Channel Processing for complex routing and automated frequency response correction using TuneEQ. The amplifier supports Start-Stop systems and operates at 10.5-18 V with temporary operation down to 6 V during crank.

  • Channels and power: 6 x 65 Watts RMS into 4 Ohms (Channels A-F); Subwoofer channels G-H: 2 x 90 Watts RMS into 4 Ohms, 2 x 160 Watts RMS into 2 Ohms
  • Amplifier technology: Class GD
  • DSP: 9-channel DSP, 64 Bit resolution, 295 MHz DSP power (1.2 billion MAC operations/second), 48 kHz sampling rate
  • Inputs: 6 x high-level speaker inputs, 1 x optical SPDIF input (12-96 kHz), 1 x MATCH Extension Card slot (MEC), 1 x remote in
  • Outputs: 8 x speaker outputs, 1 x mono RCA line output, 1 x remote out
  • Input sensitivity: 2.8 – 11 Volts
  • Input impedance high-level: 9 – 33 Ohms with ADEP.3
  • Output voltage RCA: 3 Volts RMS
  • Frequency response: 10 Hz – 22,000 Hz
  • Signal converters: A/D BurrBrown, D/A BurrBrown
  • Signal-to-noise ratio: Digital input 106 dB A-weighted; Analog input 104 dB A-weighted
  • Distortion (THD): < 0.03 %
  • Damping factor: > 100
  • Operating voltage: 10.5 – 18 Volts (max 5 sec down to 6 Volts)
  • Power rating: DC 12 V 40 A max.
  • Idle current: 380 mA
  • Max remote output current: 500 mA
  • Operating temperature range: -40 C to +70 C
  • Fuses: 2 x 25 A LP-Mini-fuse (APS)
  • Dimensions (H x W x D): 46 x 130 x 153 mm, 1.81 x 5.12 x 6.02 in
  • 8-channel amplifier with additional mono line output and integrated 9-channel DSP
  • Class GD technology for high efficiency and low heat dissipation
  • ACO 32 Bit CoProcessor for extended features and fast control
  • TuneEQ automated frequency response correction and Virtual Channel Processing
  • Smart 6-channel high-level input with ADEP.3 diagnostics protection
  • MATCH Extension Card slot (MEC) and optical SPDIF input (12-96 kHz)
  • ISA InputEQ, RealCenter and Augmented Bass Processing sound effects
  • Observe operating voltage range 10.5-18 V; temporary operation down to 6 V during engine crank is supported
  • Unit enters Protect mode if supply voltage falls below 10.5 V for more than five seconds to avoid battery discharge
  • Install appropriate power wiring and the specified 2 x 25 A LP-Mini fuses on the main power feed
  • Power Save Mode may disable remote output after 60 seconds without signal; verify settings via DSP PC-Tool to suit vehicle behavior
  • OEM multi-channel factory sound systems
  • Vehicles with 12 V electrical systems; supports Start-Stop systems and temporary crank voltages down to 6 V

you may like

Related Products

RCS Logo