AudioControl SPC-10S2 Space Series 10in Low-Profile 400W

AudioControl SPC-10S2 Space Series 10in Low-Profile 400W

R2,950.00

Space Series 10-inch single 2-ohm low-profile subwoofer with fiber matrix polypropylene cone, 3-layer high temp voice coil former, weather-resistant design and removable grille for shallow installs.

SKU SPC-10S2 Category Brand:

The AudioControl Space Series SPC-10S2 is a 10-inch shallow-mount passive subwoofer engineered for tight installations where deep bass is required. It uses a fiber matrix injection molded polypropylene cone, a 3-layer high temperature voice coil former and an optimized thermal design to maintain clean low-frequency output. Power handling is specified at 400 Watts and nominal impedance is 2 ohms.

The driver includes a wrap-sealed rubber gasket and removable grille for protection in demanding environments. Recommended amplifier pairings include the ACM-1.300, ACX-300.1 and ACX-600.1 for single-driver systems and the LC-5.1300, D-5.1300 or LC-1.1500 for higher output configurations. Enclosure recommendations for sealed and ported boxes are provided by the manufacturer for best performance.

  • Nominal Impedance: 2 ohms
  • Power Handling (Pe): 400 Watts
  • Frequency Response: 20-250 Hz
  • Resonance Frequency (Fs): 37.48 Hz
  • Sensitivity: 86.0912 dB (1W/1m)
  • Voice Coil Diameter: 2.5 in / 63.5 mm
  • Linear Excursion (Xmax): 9 mm
  • Piston Area (Sd): 0.0330 m2
  • Moving Mass (Mms): 116.0099 g
  • Displacement: 0.045 cu ft / 1.275 Ltr
  • Overall Diameter: 10.39 in / 264 mm
  • Cut-Out Diameter: 9.13 in / 232 mm
  • Mounting Depth: 3.5 in / 89 mm
  • Mounting Height without Grille: 0.71 in / 18 mm
  • Mounting Height with Grille: 1.22 in / 31 mm
  • Low-profile shallow mount design
  • Fiber matrix injection molded polypropylene cone
  • 3-layer high temperature voice coil former
  • Optimal thermal efficiency for reduced distortion
  • Wrap-sealed rubber gasket to protect enclosure interior
  • Removable subwoofer grille included
  • Nominal impedance 2 ohms
  • Disconnect vehicle battery before beginning installation
  • Use an amplifier and enclosure that match the subwoofer impedance and power ratings
  • Secure mounting hardware to prevent movement during operation
  • Consult an authorized AudioControl dealer for multi-driver or custom enclosure systems
  • Fits vehicles accepting 10in shallow-mount subwoofers with a 9.13 in cut-out
  • Requires 3.5 in (89 mm) mounting depth
  • Suitable for compact enclosures and tight trunk or under-seat installations
  • Weather-resistant design allows use in vehicles exposed to moisture and dust when properly installed

you may like

Related Products

First Name *
Email *
Last Name *
Contact Number *
Vehicle Details
Vehicle MAKE & Model
Year
REGISTRATION
Product Name
Message